Replacement knobs for your Westfalia kitchen, available as standard replacements or with a locking beam.
The locking beam makes it harder to accidentally turn on the gas, or for small humans to turn it on by mistake. The beam must be lifted with one hand while you push and turn the knob with your other hand. It also makes it much easier at a glance to check if the gas is off.
No holes need drilling, the beam just pops right in to the top vent opening.
Note that the grey kitchen face in the photos is not the original colour, the brown is also not a match for the original interior.
Two sizes available, please check the dimensions on the brass valve stem before ordering. The diameter is the across the circular section of the stem, ignoring the flat area.
Small – 6mm diameter stem
Large – 8mm diameter stem
If yours is different, let me know and we can work on a version for your stove.
If this isn’t quite what you’re looking for, or you want something similar for another vehicle, please just get in contact. We’re always looking to expand our product range.
Please look closely at the photos to ensure this item will fit on your vehicle. If in doubt, please get in touch.
There is a chance that the colour you receive may not match exactly with what you see on your screen. For the latest colours, please see the colour chart photo.
Due to the nature of 3D printing, each part will come out slightly different from the last. But the differences will be subtle. The design may also have been improved slightly since the product photo was taken.
If there’s anything complex about fitting or using the product then an instructions sheet will be included to make sure everything goes smoothly.
Cooker Knobs
CAD $28.00
Description
Replacement knobs for your Westfalia kitchen, available as standard replacements or with a locking beam.
The locking beam makes it harder to accidentally turn on the gas, or for small humans to turn it on by mistake. The beam must be lifted with one hand while you push and turn the knob with your other hand. It also makes it much easier at a glance to check if the gas is off.
No holes need drilling, the beam just pops right in to the top vent opening.
Note that the grey kitchen face in the photos is not the original colour, the brown is also not a match for the original interior.
Two sizes available, please check the dimensions on the brass valve stem before ordering. The diameter is the across the circular section of the stem, ignoring the flat area.
Small – 6mm diameter stem
Large – 8mm diameter stem
If yours is different, let me know and we can work on a version for your stove.
If this isn’t quite what you’re looking for, or you want something similar for another vehicle, please just get in contact. We’re always looking to expand our product range.
Please look closely at the photos to ensure this item will fit on your vehicle. If in doubt, please get in touch.
There is a chance that the colour you receive may not match exactly with what you see on your screen. For the latest colours, please see the colour chart photo.
Due to the nature of 3D printing, each part will come out slightly different from the last. But the differences will be subtle. The design may also have been improved slightly since the product photo was taken.
If there’s anything complex about fitting or using the product then an instructions sheet will be included to make sure everything goes smoothly.
Additional information