Drop in replacement for the vents at each end of the dash top. Allows you to maintain airflow to the windscreen and the side windows but also fit a tweeter speaker of your choosing to improve the audio performance.
This is a generic, cut-your-own, vent replacement. There is a 2mm thick top surface with scored marks at 1, 1.25, 1.5 and 1.75 inch diameters. A small central hole also makes using a hole saw more accurate. The void underneath the top surface is 44.5mm (1.75in) in diamater and 25mm (1in) deep. This is the maximum size speaker that can easily be fitted. The width of the top face is 50mm, if using a speaker with a bezel, anything larger will overlap the sides.
If you know the size of the tweeter you will be using, see our other products to specify a custom version of this product with hole dimensions of your choosing.
Due to the depth of the pocket some air is obstructed from the side window defrost, this will increase the time for side windows to clear of moisture, but you can always open the window instead or aim the front facing vents to the side.
Please get in contact if you have any questions. Sold as a pair.
If this isn’t quite what you’re looking for, or you want something similar for another vehicle, please just get in contact. We’re always looking to expand our product range.
Please look closely at the photos to ensure this item will fit on your vehicle. If in doubt, please get in touch.
There is a chance that the colour you receive may not match exactly with what you see on your screen. For the latest colours, please see the colour chart photo.
Due to the nature of 3D printing, each part will come out slightly different from the last. But the differences will be subtle. The design may also have been improved slightly since the product photo was taken.
If there’s anything complex about fitting or using the product then an instructions sheet will be included to make sure everything goes smoothly.